Like any other vehicle, your motorcycle requires a basic level of maintenance to keep it performing at its best and ensure your safety. One of the most important aspects is the motorbike engine oil, depending on the type of bike and how it is used, it must be frequently replaced. but what type of oil do you need? and should you check the oil when the engine is hot or cold?
With various engine types and oils, many owners are faced with a confusing array of informaton and products and don't know where to start. So here at OneHowTo we have put together a quick and easy guide to explain step-by-step how to check the oil level on a 4-stroke motorcycle engine.
For our bike to circulate properly and effectively, it is important to maintain a good level of oil. With a 4-stroke engine, you should check the oil level and top it up appropriately each 1,000 km and just before a long journey.
If you tend to drive on unstable ground or go offroad, or live in a place with a hotter climate, you should check the oil more frequently than this.
So when is the best time to check the oil level for a motorbike engine? Should you check the oil when the engine is warm or cold? To get the most accurate result, it is recommended to go out for a quick spin to warm the engine and get the oil circulating. Once you get home or wherever you are going to do the review, you should let the bike stand for about 15 minutes to allow the oil to drain and return to its natural position.
Many people recommend measuring motorcycle oil cold, however this method is considered more effective by some mechanics.
After the 15 minutes, with the bike in an upright position without being supported on the stand, take out the dipstick and wipe it clean. Replace it but without screwing it in (very important) to measure the current level of oil.
There are different types of rods, but all will always have an indicator with two stripes that indicate clearly the minimum and maximum oil level your bike engine needs. When removing the rod, you will see the current level of oil. If it is correct, screw it back in and you are good to go. If the oil is too low, you must top up or change the oil and fill to the desired level.
It is important to note that you should always use the same type of oil to replenish the bike's oil levels. So once you do an oil change on your bike, be sure to purchase one or several bottles of the same brand to take home for subsequent top-ups.
So now you know how to check oil levels for a four-stroke motorbike! You might be interested in learning about how to adjust your carburettor.
If you want to read similar articles to How to Check Motorbike Engine Oil Level, we recommend you visit our Motorbike Maintance and Repair category.